Barrel Parts

Welcome to Fusion Firearms shotgun barrel parts page. Here you will find top of the line parts for our shotguns. We stock all components to replace and upgrade our shotguns.

Frequently Asked Questions

What are the parts of a gun barrel called?

The gun barrel is the long, cylindrical portion of the firearm that the bullet or shot travels through. It is an essential part of the firearm and is composed of several important components:

• Muzzle: The muzzle is the front end of the barrel where the bullet or shot exits the firearm.
• Bore: The bore is the inner diameter of the barrel through which the bullet or shot travels. The bore diameter can vary depending on the type of firearm and its intended use.
• Rib: The raised metal strip on the top of the barrel that helps to aim the firearm.
• Chamber: The chamber is part of the barrel where the cartridge or shotshell is loaded before firing. It is typically located at the rear of the barrel and is designed to hold the cartridge or shotshell in place.
• Choke: A choke is a constriction at the end of the barrel that controls the spread of the shot as it exits the barrel. It can adjust the shot pattern for different hunting or shooting activities.
• Sights: The Sights will vary depending on manufacture. This is The device(s) mounted on the barrel that assists in aiming the firearm. Most shotguns come standard with a front bead sight while others will have adjustable sights or optics.

What is the end of a shotgun barrel called?

The end of a shotgun barrel is called the muzzle.

What is the hole in a gun barrel called?

The hole in a gun barrel is called the bore. It is the interior part of the barrel through which the bullet or shot travels when the firearm is fired. The bore diameter can vary depending on the type of firearm and its intended use.

What is the rod under a gun barrel?

The rod located underneath a gun barrel is most likely the gun's forend, also known as a forestock or forearm. The forend is a part of the gun's stock and is located under the barrel. It is typically made of wood, plastic, or synthetic materials, and is designed to be gripped by the shooter's non-firing hand to provide additional support and control over the firearm. The forend can also help to protect the shooter's hand from the heat generated by firing the gun, particularly in firearms that fire rapidly or produce a significant amount of recoil. In shotguns, the forend is used to pump the firearm to eject spent shells and load new ones.

It's worth noting that there are other types of rods or tubes that can be located underneath a gun barrel, such as a cleaning rod, but these are typically only attached to the firearm temporarily for maintenance purposes and are not a permanent part of the gun's design.